HOME > PRODUCTS > Stone CNC Router > 3 Axis CNC Router
JK-1530S-2 two heads 3d stone engraver 1530 cnc granite engraving machine
1.Features and Advantages
1. Heavy duty T-slot machine body, with reinforcing steel bar,which makes the machine more stable and with larger loading capacity.
2. X Y Z uses 25mm PMI or HIWIN linear square guide rail, it is more stable and has longer life than normal round one.
3. Z axis use 25mm hign precision ball screw and can avoid spindle suddenly up and down.
4. Stepper motor and driver, higher precision. Break point memory can stop work with wrong signals and avoid the waste of materials.
5. Chinese Fuling inverter control the spindle speed.
6. Adopt stone specialized 5.5KW water cooling spindle, which is suitable for long time and high temperature working.
7. Uses NcStudio or DSP control system, easy and convenient to operate.
8. 200mm feeding height, suitable for large and thick stone.Max. speed can reach 30m/min.
2.Parameters for 1530 CNC Granite Engraving Machine
Model |
JK-1530S-2 |
Working size(xyz axis) |
1500*3000*200mm(750*3000*200mm/head) |
X Y Z rail |
PMI/HIWIN linear square guide rail |
X Y transmission |
Rack and pinion |
Z transmission |
High precision Germany ball screw |
Spindle |
5.5kw*2 water cooling spindle |
Spindle speed |
24000rpm |
Inverter |
Fuling inverter |
Motor |
Stepper motor |
Driver |
Stepper driver |
Transformer |
Yes |
Lubrication |
Yes |
Max. speed |
10000mm/min |
Max. working speed |
4000mm/min |
Voltage |
AC 220V/380V 50HZ three phase |
Collets |
ER25 3.175-16mm |
Repeat reposition accuracy |
0.025mm |
Max. cutting thickness |
<=20mm |
Cover |
X Y Z cover |
Command |
G code |
Software |
Artcam/ Ucancam |
Control system |
NcStudio |
Remark |
Optional driving mode: |
Servo motor and driver |
|
Optional control system: |
|
DSP |
4.1530 CNC Granite Engraving Machine features:
1.Spindle
The machine adopts high speed(0-24000RPM),high torque and high precision 5.5kw water cooling
electric spindle,which is adjusted by Fuling inverter. This guarantees the high working speed and accuracy,
and can realize milling with high speed,high rotating precision,good rotating with low noise.
It engraves without any ripple but with smooth bottom level and clear outline.
2. Hiwin square rail and sliding block
1).We adopt the world famous rail and guide manufacturer Taiwan Hiwin square rails ,self lubricating
sliding block. This ensures equal force in all directions and accuracy and strength of the machine.
2).Comparing with the round rail, the square rails has higher precision, less wear and tear. Square rails apply to high-speed move and greatly reduce the drive horsepower the machine required.
What’s more, it can bear the load from left and right/up and down at the same time.
3. Leadshine stepper motor
1).Won't lose step when it work,guarantee the positional accuracy of the motor.
2).Speed performance increased about 30%,improve the equipment speed heavily.
3).Motor heat fell down 30%, prolong the life time of the motor.
4).Vibration phenomenon significantly reduced, motor run more smoothly.
5).Adopted the current control system technology,save power consumption.
5.1530 CNC Granite Engraving Machine samples: