HOME > PRODUCTS > Stone CNC Router > 3 Axis CNC Router
JK-9015S Stone Carving CNC Router
Application: marble ,granite ect stone lettering/2D&3D engraving/thin stone cutting
9015S Stone Carving CNC Router parameters
| Model | JK-9015S |
| Machine body | Heavy duty T-slot |
| Working area(XYZ axis) | 900*1500*200mm |
| table | Aluminum table +15mmABS board |
| X Y Z rail | PMI/HIWIN linear square guide rail |
| X Y transmission | Rack and pinion |
| Z transmission | High precision ball screw |
| Spindle | 3.2kw water cooling spindle |
| Spindle speed | 24000rpm |
| Inverter | Fuling inverter |
| Motor | Stepper motor |
| Driver | Stepper driver |
| Transformer | Yes |
| Lubrication | Yes |
| Max. speed | 30m/min |
| Max. working speed | 20m/min |
| Voltage | AC 380V 50HZ three phase |
| Collets | ER20 3.175-14mm |
| Repeat reposition accuracy | 0.025mm |
| Max. cutting thickness | <=20mm |
| Cover | X Y Z cover |
| Command | G code |
| Software | Artcam/ Ucancam |
| Control system | Ncstudio |
| Remark | Optional driving mode: |
| Servo motor and driver | |
| Optional control system: | |
| DSP |
9015S Stone Carving CNC Router details
9015 Stone Carving CNC Router features
1.Spindle
The machine adopts high speed(0-24000RPM),high torque and high precision 5.5kw water cooling
electric spindle,which is adjusted by Fuling inverter. This guarantees the high working speed and accuracy,
and can realize milling with high speed,high rotating precision,good rotating with low noise.
It engraves without any ripple but with smooth bottom level and clear outline.
2. Hiwin square rail and sliding block
1).We adopt the world famous rail and guide manufacturer Taiwan Hiwin square rails ,self lubricating
sliding block. This ensures equal force in all directions and accuracy and strength of the machine.
2).Comparing with the round rail, the square rails has higher precision, less wear and tear. Square rails apply to high-speed move and greatly reduce the drive horsepower the machine required.
What’s more, it can bear the load from left and right/up and down at the same time.
3. Leadshine stepper motor
1).Won't lose step when it work,guarantee the positional accuracy of the motor.
4).Vibration phenomenon significantly reduced, motor run more smoothly.
9015 Stone Carving CNC Router engraving samples
2).Speed performance increased about 30%,improve the equipment speed heavily.
3).Motor heat fell down 30%, prolong the life time of the motor.
5).Adopted the current control system technology,save power consumption.
Skype
Tel