Stone engraving machines are an integral part of traditional Chinese industries. On the basis of the development of science and technology, the original manual operation of stone engraving has also been introduced into machine production, and stone engraving machines have become a new member of the stone engraving industry.
The current stone engraving machine is a computer-controlled automatic numerical control equipment. Proper maintenance is very helpful to maintain the engraving accuracy of the stone engraving machine and ensure the service life of the stone engraving machine.
Stone engraving machine maintenance includes the following two aspects:
First, the machine should be cleaned in time after use. The stone engraving machine will generate a lot of dust during use, and too much dust will have a great impact on the life of the stone engraving machine. Therefore, be sure to clean up the dust on the platform and transmission system after each use, and lubricate regularly.
Second, to ensure that the continuous running time of the stone engraving machine is less than 10 hours a day, to ensure the cleanliness of the cooling water and the normal operation of the water pump. The cooling water is very important to the operation of the stone engraving machine. During the use process, the water spindle motor must not be short of water. At the same time, the cooling water should be replaced regularly to prevent the water temperature from being too high. When running the stone engraving machine in winter, if the working environment temperature is too low, the water in the water tank can be replaced with antifreeze.
In addition, when the stone engraving machine is used, the power must be cut off, and you can leave after the monitor has no display and the main circuit power indicator is off, which can prolong the service life of the stone engraving machine.
Skype
Tel