Jinan Jiahe CNC

How to Prevent Problems with Quick Engraving

Fast engraving is one of the commonly used functions of woodworking engraving machines. As the name suggests, fast engraving is faster in engraving work. However, fast speed is often prone to various problems. In order to ensure the quality requirements of customers and the level of engraving, we must try our best to avoid mistakes in fast engraving. Then we must understand the reason for the problem of fast engraving. These problems lead to the ability to target the distinction. Next, let's follow the stone engraving machine manufacturers to learn about the quick engraving problems of woodworking engraving machines and how to prevent the problems of fast engraving!

For those irregularly shaped sculpted objects, which appear to have been held tightly on the surface, they will rock back and forth when subjected to downforce. At this time, you can try to put some scrap under the object to increase the friction. The other is to keep the packaging that comes with the item. Although the object is irregular in shape, the packaging itself may be very regular and easy to be fixed. With a small strap, the irregularly shaped object is very easy to be fixed. Easily fixed. Or try tools to fix its regular parts and discard its irregular parts.

Check whether the pliers or chucks selected for engraving are used incorrectly. At the same time, the wear of the pliers or chucks of the woodworking engraving machine will also cause the dislocation of the engraved objects. If the pliers or chucks are too tight, the object to be engraved will be ejected at the moment when the cutter head touches the object to be engraved.

If the downforce on the engraved object is high, consider whether you must use a tapered knife nose. If the engraving machine diamond head is under too much pressure during the engraving process, the pressure on the side of the tool will cause the engraved object to move. . The same problem can be caused if the incorrect diamond knife is used. A 90 or 100 degree diamond knife will carve deep into the material, causing the material to move as it is being carved.

For engraving plastic patterns, you can stick the transfer tape on the back of the object to be engraved, and then spray the side with the tape with liquid spray glue, and then stick it on a surface that can be discarded, which can avoid the use of double-sided tape, leaving behind a hard-to-clean surface. Because the transfer tape is easy to peel off and clean up. Use a special engraved tape that is more sticky on one side than the other, so the plates can be moved or replaced at will.

Since woodworking engraving machines are often equipped with multi-functional pliers or chucks, and they are made of iron, it is easy to cause damage to the engraved object or make it slip off during the engraving process, so choose some rubber caps or rubber tubes for The fixation of the engraved object will help.


The above is the article shared by the stone engraving machine manufacturer, I hope it will be helpful to you.